xiaozhi/main/boards/waveshare-p4-nano/config.h

#ifndef _BOARD_CONFIG_H_
#define _BOARD_CONFIG_H_

#include <driver/gpio.h>

#define AUDIO_INPUT_SAMPLE_RATE  24000
#define AUDIO_OUTPUT_SAMPLE_RATE 24000

#define AUDIO_I2S_GPIO_MCLK GPIO_NUM_13
#define AUDIO_I2S_GPIO_WS GPIO_NUM_10
#define AUDIO_I2S_GPIO_BCLK GPIO_NUM_12
#define AUDIO_I2S_GPIO_DIN  GPIO_NUM_11
#define AUDIO_I2S_GPIO_DOUT GPIO_NUM_9

#define AUDIO_CODEC_PA_PIN       GPIO_NUM_53
#define AUDIO_CODEC_I2C_SDA_PIN  GPIO_NUM_7
#define AUDIO_CODEC_I2C_SCL_PIN  GPIO_NUM_8
#define AUDIO_CODEC_ES8311_ADDR  ES8311_CODEC_DEFAULT_ADDR

#define BOOT_BUTTON_GPIO        GPIO_NUM_35

#define DISPLAY_WIDTH 800
#define DISPLAY_HEIGHT 1280

#define LCD_BIT_PER_PIXEL          (16)
#define PIN_NUM_LCD_RST            GPIO_NUM_NC

#define DELAY_TIME_MS                      (3000)
#define LCD_MIPI_DSI_LANE_NUM          (2)    // 2 data lanes

#define MIPI_DSI_PHY_PWR_LDO_CHAN          (3)
#define MIPI_DSI_PHY_PWR_LDO_VOLTAGE_MV    (2500)

#define DISPLAY_SWAP_XY false
#define DISPLAY_MIRROR_X false
#define DISPLAY_MIRROR_Y false

#define DISPLAY_OFFSET_X  0
#define DISPLAY_OFFSET_Y  0

#define DISPLAY_BACKLIGHT_PIN GPIO_NUM_NC
#define DISPLAY_BACKLIGHT_OUTPUT_INVERT false

#endif // _BOARD_CONFIG_H_