#include "wifi_board.h"
#include "codecs/box_audio_codec.h"
#include "application.h"
#include "display/lcd_display.h"
// #include "display/no_display.h"
#include "button.h"
#include "config.h"

#include "esp_lcd_panel_ops.h"
#include "esp_lcd_mipi_dsi.h"
#include "esp_ldo_regulator.h"

#include "esp_lcd_st7703.h"

#include <wifi_station.h>
#include <esp_log.h>
#include <driver/i2c_master.h>
#include <esp_lvgl_port.h>
#include "esp_lcd_touch_gt911.h"
#define TAG "WaveshareEsp32p44b"

LV_FONT_DECLARE(font_puhui_30_4);
LV_FONT_DECLARE(font_awesome_30_4);

class WaveshareEsp32p44b : public WifiBoard {
private:
    i2c_master_bus_handle_t i2c_bus_;
    Button boot_button_;
    LcdDisplay *display_;

    void InitializeCodecI2c() {
        // Initialize I2C peripheral
        i2c_master_bus_config_t i2c_bus_cfg = {
            .i2c_port = I2C_NUM_1,
            .sda_io_num = AUDIO_CODEC_I2C_SDA_PIN,
            .scl_io_num = AUDIO_CODEC_I2C_SCL_PIN,
            .clk_source = I2C_CLK_SRC_DEFAULT,
            .glitch_ignore_cnt = 7,
            .intr_priority = 0,
            .trans_queue_depth = 0,
            .flags = {
                .enable_internal_pullup = 1,
            },
        };
        ESP_ERROR_CHECK(i2c_new_master_bus(&i2c_bus_cfg, &i2c_bus_));
    }

    static esp_err_t bsp_enable_dsi_phy_power(void) {
#if MIPI_DSI_PHY_PWR_LDO_CHAN > 0
        // Turn on the power for MIPI DSI PHY, so it can go from "No Power" state to "Shutdown" state
        static esp_ldo_channel_handle_t phy_pwr_chan = NULL;
        esp_ldo_channel_config_t ldo_cfg = {
            .chan_id = MIPI_DSI_PHY_PWR_LDO_CHAN,
            .voltage_mv = MIPI_DSI_PHY_PWR_LDO_VOLTAGE_MV,
        };
        esp_ldo_acquire_channel(&ldo_cfg, &phy_pwr_chan);
        ESP_LOGI(TAG, "MIPI DSI PHY Powered on");
#endif // BSP_MIPI_DSI_PHY_PWR_LDO_CHAN > 0

        return ESP_OK;
    }

    void InitializeLCD() {
        bsp_enable_dsi_phy_power();
        esp_lcd_panel_io_handle_t io = NULL;
        esp_lcd_panel_handle_t disp_panel = NULL;

        esp_lcd_dsi_bus_handle_t mipi_dsi_bus = NULL;
        esp_lcd_dsi_bus_config_t bus_config = ST7703_PANEL_BUS_DSI_2CH_CONFIG();
        esp_lcd_new_dsi_bus(&bus_config, &mipi_dsi_bus);

        ESP_LOGI(TAG, "Install MIPI DSI LCD control panel");
        // we use DBI interface to send LCD commands and parameters
        esp_lcd_dbi_io_config_t dbi_config = ST7703_PANEL_IO_DBI_CONFIG();
        esp_lcd_new_panel_io_dbi(mipi_dsi_bus, &dbi_config, &io);

        esp_lcd_dpi_panel_config_t dpi_config = {
            .dpi_clk_src = MIPI_DSI_DPI_CLK_SRC_DEFAULT,
            .dpi_clock_freq_mhz = 46,
            .pixel_format = LCD_COLOR_PIXEL_FORMAT_RGB565,
            .num_fbs = 1,
            .video_timing = {
                .h_size = 720,
                .v_size = 720,
                .hsync_pulse_width = 20,
                .hsync_back_porch = 80,
                .hsync_front_porch = 80,
                .vsync_pulse_width = 4,
                .vsync_back_porch = 12,
                .vsync_front_porch = 30,
            },
            .flags = {
                .use_dma2d = true,
            },
        };
        st7703_vendor_config_t vendor_config = {

            .mipi_config = {
                .dsi_bus = mipi_dsi_bus,
                .dpi_config = &dpi_config,
            },
            .flags = {
                .use_mipi_interface = 1,
            },
        };

        const esp_lcd_panel_dev_config_t lcd_dev_config = {
            .reset_gpio_num = PIN_NUM_LCD_RST,
            .rgb_ele_order = LCD_RGB_ELEMENT_ORDER_RGB,
            .bits_per_pixel = 16,
            .vendor_config = &vendor_config,
        };
        esp_lcd_new_panel_st7703(io, &lcd_dev_config, &disp_panel);
        esp_lcd_panel_reset(disp_panel);
        esp_lcd_panel_init(disp_panel);

        display_ = new MipiLcdDisplay(io, disp_panel, DISPLAY_WIDTH, DISPLAY_HEIGHT,
                                       DISPLAY_OFFSET_X, DISPLAY_OFFSET_Y, DISPLAY_MIRROR_X, DISPLAY_MIRROR_Y, DISPLAY_SWAP_XY,
                                       {
                                           .text_font = &font_puhui_30_4,
                                           .icon_font = &font_awesome_30_4,
                                           .emoji_font = font_emoji_64_init(),
                                       });
    }
    void InitializeTouch()
    {
        esp_lcd_touch_handle_t tp;
        esp_lcd_touch_config_t tp_cfg = {
            .x_max = DISPLAY_WIDTH,
            .y_max = DISPLAY_HEIGHT,
            .rst_gpio_num = GPIO_NUM_23,
            .int_gpio_num = GPIO_NUM_NC,
            .levels = {
                .reset = 0,
                .interrupt = 0,
            },
            .flags = {
                .swap_xy = 0,
                .mirror_x = 0,
                .mirror_y = 0,
            },
        };
        esp_lcd_panel_io_handle_t tp_io_handle = NULL;
        esp_lcd_panel_io_i2c_config_t tp_io_config = ESP_LCD_TOUCH_IO_I2C_GT911_CONFIG();
        tp_io_config.scl_speed_hz = 400 * 1000;
        ESP_ERROR_CHECK(esp_lcd_new_panel_io_i2c(i2c_bus_, &tp_io_config, &tp_io_handle));
        ESP_LOGI(TAG, "Initialize touch controller");
        ESP_ERROR_CHECK(esp_lcd_touch_new_i2c_gt911(tp_io_handle, &tp_cfg, &tp));
        const lvgl_port_touch_cfg_t touch_cfg = {
            .disp = lv_display_get_default(),
            .handle = tp,
        };
        lvgl_port_add_touch(&touch_cfg);
        ESP_LOGI(TAG, "Touch panel initialized successfully");
    }
    void InitializeButtons() {
        boot_button_.OnClick([this]() {
            auto& app = Application::GetInstance();
            if (app.GetDeviceState() == kDeviceStateStarting && !WifiStation::GetInstance().IsConnected()) {
                ResetWifiConfiguration();
            }
            app.ToggleChatState(); });
    }

public:
    WaveshareEsp32p44b() :
        boot_button_(BOOT_BUTTON_GPIO) {
        InitializeCodecI2c();
        InitializeLCD();
        InitializeTouch();
        InitializeButtons();
        GetBacklight()->RestoreBrightness();
    }

    virtual AudioCodec* GetAudioCodec() override {
        static BoxAudioCodec audio_codec(
            i2c_bus_, 
            AUDIO_INPUT_SAMPLE_RATE, 
            AUDIO_OUTPUT_SAMPLE_RATE,
            AUDIO_I2S_GPIO_MCLK, 
            AUDIO_I2S_GPIO_BCLK, 
            AUDIO_I2S_GPIO_WS, 
            AUDIO_I2S_GPIO_DOUT, 
            AUDIO_I2S_GPIO_DIN,
            AUDIO_CODEC_PA_PIN, 
            AUDIO_CODEC_ES8311_ADDR, 
            AUDIO_CODEC_ES7210_ADDR, 
            AUDIO_INPUT_REFERENCE);
        return &audio_codec;
    }

    virtual Display *GetDisplay() override {
        return display_;
    }

    virtual Backlight* GetBacklight() override {
        static PwmBacklight backlight(DISPLAY_BACKLIGHT_PIN, DISPLAY_BACKLIGHT_OUTPUT_INVERT);
        return &backlight;
    }
};

DECLARE_BOARD(WaveshareEsp32p44b);