123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151 |
- /*!
- \file gd32f10x_rtc.h
- \brief definitions for the RTC
-
- \version 2014-12-26, V1.0.0, firmware for GD32F10x
- \version 2017-06-20, V2.0.0, firmware for GD32F10x
- \version 2018-07-31, V2.1.0, firmware for GD32F10x
- \version 2020-09-30, V2.2.0, firmware for GD32F10x
- */
- /*
- Copyright (c) 2020, GigaDevice Semiconductor Inc.
- Redistribution and use in source and binary forms, with or without modification,
- are permitted provided that the following conditions are met:
- 1. Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above copyright notice,
- this list of conditions and the following disclaimer in the documentation
- and/or other materials provided with the distribution.
- 3. Neither the name of the copyright holder nor the names of its contributors
- may be used to endorse or promote products derived from this software without
- specific prior written permission.
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
- INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
- OF SUCH DAMAGE.
- */
- #ifndef GD32F10X_RTC_H
- #define GD32F10X_RTC_H
- #include "gd32f10x.h"
- /* RTC definitions */
- #define RTC RTC_BASE
- /* registers definitions */
- #define RTC_INTEN REG32(RTC + 0x00U) /*!< interrupt enable register */
- #define RTC_CTL REG32(RTC + 0x04U) /*!< control register */
- #define RTC_PSCH REG32(RTC + 0x08U) /*!< prescaler high register */
- #define RTC_PSCL REG32(RTC + 0x0CU) /*!< prescaler low register */
- #define RTC_DIVH REG32(RTC + 0x10U) /*!< divider high register */
- #define RTC_DIVL REG32(RTC + 0x14U) /*!< divider low register */
- #define RTC_CNTH REG32(RTC + 0x18U) /*!< counter high register */
- #define RTC_CNTL REG32(RTC + 0x1CU) /*!< counter low register */
- #define RTC_ALRMH REG32(RTC + 0x20U) /*!< alarm high register */
- #define RTC_ALRML REG32(RTC + 0x24U) /*!< alarm low register */
- /* bits definitions */
- /* RTC_INTEN */
- #define RTC_INTEN_SCIE BIT(0) /*!< second interrupt enable */
- #define RTC_INTEN_ALRMIE BIT(1) /*!< alarm interrupt enable */
- #define RTC_INTEN_OVIE BIT(2) /*!< overflow interrupt enable */
- /* RTC_CTL */
- #define RTC_CTL_SCIF BIT(0) /*!< second interrupt flag */
- #define RTC_CTL_ALRMIF BIT(1) /*!< alarm interrupt flag */
- #define RTC_CTL_OVIF BIT(2) /*!< overflow interrupt flag */
- #define RTC_CTL_RSYNF BIT(3) /*!< registers synchronized flag */
- #define RTC_CTL_CMF BIT(4) /*!< configuration mode flag */
- #define RTC_CTL_LWOFF BIT(5) /*!< last write operation finished flag */
- /* RTC_PSCH */
- #define RTC_PSCH_PSC BITS(0,3) /*!< prescaler high value */
- /* RTC_PSCL */
- #define RTC_PSCL_PSC BITS(0,15) /*!< prescaler low value */
- /* RTC_DIVH */
- #define RTC_DIVH_DIV BITS(0,3) /*!< divider high value */
- /* RTC_DIVL */
- #define RTC_DIVL_DIV BITS(0,15) /*!< divider low value */
- /* RTC_CNTH */
- #define RTC_CNTH_CNT BITS(0,15) /*!< counter high value */
- /* RTC_CNTL */
- #define RTC_CNTL_CNT BITS(0,15) /*!< counter low value */
- /* RTC_ALRMH */
- #define RTC_ALRMH_ALRM BITS(0,15) /*!< alarm high value */
- /* RTC_ALRML */
- #define RTC_ALRML_ALRM BITS(0,15) /*!< alarm low value */
- /* constants definitions */
- /* RTC interrupt enable or disable definitions */
- #define RTC_INT_SECOND RTC_INTEN_SCIE /*!< second interrupt enable */
- #define RTC_INT_ALARM RTC_INTEN_ALRMIE /*!< alarm interrupt enable */
- #define RTC_INT_OVERFLOW RTC_INTEN_OVIE /*!< overflow interrupt enable */
- /* RTC interrupt flag definitions */
- #define RTC_INT_FLAG_SECOND RTC_CTL_SCIF /*!< second interrupt flag */
- #define RTC_INT_FLAG_ALARM RTC_CTL_ALRMIF /*!< alarm interrupt flag */
- #define RTC_INT_FLAG_OVERFLOW RTC_CTL_OVIF /*!< overflow interrupt flag */
- /* RTC flag definitions */
- #define RTC_FLAG_SECOND RTC_CTL_SCIF /*!< second interrupt flag */
- #define RTC_FLAG_ALARM RTC_CTL_ALRMIF /*!< alarm interrupt flag */
- #define RTC_FLAG_OVERFLOW RTC_CTL_OVIF /*!< overflow interrupt flag */
- #define RTC_FLAG_RSYN RTC_CTL_RSYNF /*!< registers synchronized flag */
- #define RTC_FLAG_LWOF RTC_CTL_LWOFF /*!< last write operation finished flag */
- /* function declarations */
- /* initialization functions */
- /* enter RTC configuration mode */
- void rtc_configuration_mode_enter(void);
- /* exit RTC configuration mode */
- void rtc_configuration_mode_exit(void);
- /* set RTC counter value */
- void rtc_counter_set(uint32_t cnt);
- /* set RTC prescaler value */
- void rtc_prescaler_set(uint32_t psc);
- /* operation functions */
- /* wait RTC last write operation finished flag set */
- void rtc_lwoff_wait(void);
- /* wait RTC registers synchronized flag set */
- void rtc_register_sync_wait(void);
- /* set RTC alarm value */
- void rtc_alarm_config(uint32_t alarm);
- /* get RTC counter value */
- uint32_t rtc_counter_get(void);
- /* get RTC divider value */
- uint32_t rtc_divider_get(void);
- /* flag & interrupt functions */
- /* get RTC flag status */
- FlagStatus rtc_flag_get(uint32_t flag);
- /* clear RTC flag status */
- void rtc_flag_clear(uint32_t flag);
- /* get RTC interrupt flag status */
- FlagStatus rtc_interrupt_flag_get(uint32_t flag);
- /* clear RTC interrupt flag status */
- void rtc_interrupt_flag_clear(uint32_t flag);
- /* enable RTC interrupt */
- void rtc_interrupt_enable(uint32_t interrupt);
- /* disable RTC interrupt */
- void rtc_interrupt_disable(uint32_t interrupt);
- #endif /* GD32F10X_RTC_H */
|