;/*!
; \file startup_gd32f10x_cl.s
; \brief start up file
;
; \version 2014-12-26, V1.0.0, firmware for GD32F10x
; \version 2017-06-20, V2.0.0, firmware for GD32F10x
; \version 2018-07-31, V2.1.0, firmware for GD32F10x
;*/
;
;/*
; Copyright (c) 2018, GigaDevice Semiconductor Inc.
;
; All rights reserved.
;
; Redistribution and use in source and binary forms, with or without modification,
;are permitted provided that the following conditions are met:
;
; 1. Redistributions of source code must retain the above copyright notice, this
; list of conditions and the following disclaimer.
; 2. Redistributions in binary form must reproduce the above copyright notice,
; this list of conditions and the following disclaimer in the documentation
; and/or other materials provided with the distribution.
; 3. Neither the name of the copyright holder nor the names of its contributors
; may be used to endorse or promote products derived from this software without
; specific prior written permission.
;
; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
;AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
;WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
;IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
;INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
;NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
;PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
;WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
;ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
;OF SUCH DAMAGE.
;*/
; Stack Configuration
; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
;
Stack_Size EQU 0x00000400
AREA STACK, NOINIT, READWRITE, ALIGN = 3
Stack_Mem SPACE Stack_Size
__initial_sp
; Heap Configuration
; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
;
Heap_Size EQU 0x00000200
AREA HEAP, NOINIT, READWRITE, ALIGN = 3
__heap_base
Heap_Mem SPACE Heap_Size
__heap_limit
PRESERVE8
THUMB
; /* reset Vector Mapped to at Address 0 */
AREA RESET, DATA, READONLY
EXPORT __Vectors
EXPORT __Vectors_End
EXPORT __Vectors_Size
__Vectors DCD __initial_sp ; Top of Stack
DCD Reset_Handler ; Reset Handler
DCD NMI_Handler ; NMI Handler
DCD HardFault_Handler ; Hard Fault Handler
DCD MemManage_Handler ; MPU Fault Handler
DCD BusFault_Handler ; Bus Fault Handler
DCD UsageFault_Handler ; Usage Fault Handler
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD 0 ; Reserved
DCD SVC_Handler ; SVCall Handler
DCD DebugMon_Handler ; Debug Monitor Handler
DCD 0 ; Reserved
DCD PendSV_Handler ; PendSV Handler
DCD SysTick_Handler ; SysTick Handler
; /* external interrupts handler */
DCD WWDGT_IRQHandler ; 16:Window Watchdog Timer
DCD LVD_IRQHandler ; 17:LVD through EXTI Line detect
DCD TAMPER_IRQHandler ; 18:Tamper Interrupt
DCD RTC_IRQHandler ; 19:RTC through EXTI Line
DCD FMC_IRQHandler ; 20:FMC
DCD RCU_IRQHandler ; 21:RCU
DCD EXTI0_IRQHandler ; 22:EXTI Line 0
DCD EXTI1_IRQHandler ; 23:EXTI Line 1
DCD EXTI2_IRQHandler ; 24:EXTI Line 2
DCD EXTI3_IRQHandler ; 25:EXTI Line 3
DCD EXTI4_IRQHandler ; 26:EXTI Line 4
DCD DMA0_Channel0_IRQHandler ; 27:DMA0 Channel 0
DCD DMA0_Channel1_IRQHandler ; 28:DMA0 Channel 1
DCD DMA0_Channel2_IRQHandler ; 29:DMA0 Channel 2
DCD DMA0_Channel3_IRQHandler ; 30:DMA0 Channel 3
DCD DMA0_Channel4_IRQHandler ; 31:DMA0 Channel 4
DCD DMA0_Channel5_IRQHandler ; 32:DMA0 Channel 5
DCD DMA0_Channel6_IRQHandler ; 33:DMA0 Channel 6
DCD ADC0_1_IRQHandler ; 34:ADC0 and ADC1
DCD CAN0_TX_IRQHandler ; 35:CAN0 TX
DCD CAN0_RX0_IRQHandler ; 36:CAN0 RX0
DCD CAN0_RX1_IRQHandler ; 37:CAN0 RX1
DCD CAN0_EWMC_IRQHandler ; 38:CAN0 EWMC
DCD EXTI5_9_IRQHandler ; 39:EXTI Line 5 to EXTI Line 9
DCD TIMER0_BRK_IRQHandler ; 40:TIMER0 Break
DCD TIMER0_UP_IRQHandler ; 41:TIMER0 Update
DCD TIMER0_TRG_CMT_IRQHandler ; 42:TIMER0 Trigger and Commutation
DCD TIMER0_Channel_IRQHandler ; 43:TIMER0 Channel Capture Compare
DCD TIMER1_IRQHandler ; 44:TIMER1
DCD TIMER2_IRQHandler ; 45:TIMER2
DCD TIMER3_IRQHandler ; 46:TIMER3
DCD I2C0_EV_IRQHandler ; 47:I2C0 Event
DCD I2C0_ER_IRQHandler ; 48:I2C0 Error
DCD I2C1_EV_IRQHandler ; 49:I2C1 Event
DCD I2C1_ER_IRQHandler ; 50:I2C1 Error
DCD SPI0_IRQHandler ; 51:SPI0
DCD SPI1_IRQHandler ; 52:SPI1
DCD USART0_IRQHandler ; 53:USART0
DCD USART1_IRQHandler ; 54:USART1
DCD USART2_IRQHandler ; 55:USART2
DCD EXTI10_15_IRQHandler ; 56:EXTI Line 10 to EXTI Line 15
DCD RTC_Alarm_IRQHandler ; 57:RTC Alarm through EXTI Line
DCD USBFS_WKUP_IRQHandler ; 58:USBFS WakeUp from suspend through EXTI Line
DCD TIMER7_BRK_IRQHandler ; 59:TIMER7 Break Interrupt
DCD TIMER7_UP_IRQHandler ; 60:TIMER7 Update Interrupt
DCD TIMER7_TRG_CMT_IRQHandler ; 61:TIMER7 Trigger
DCD TIMER7_Channel_IRQHandler ; 62:TIMER7 Channel Capture Compare
DCD 0 ; Reserved
DCD EXMC_IRQHandler ; 64:EXMC
DCD 0 ; Reserved
DCD TIMER4_IRQHandler ; 66:TIMER4
DCD SPI2_IRQHandler ; 67:SPI2
DCD UART3_IRQHandler ; 68:UART3
DCD UART4_IRQHandler ; 69:UART4
DCD TIMER5_IRQHandler ; 70:TIMER5
DCD TIMER6_IRQHandler ; 71:TIMER6
DCD DMA1_Channel0_IRQHandler ; 72:DMA1 Channel0
DCD DMA1_Channel1_IRQHandler ; 73:DMA1 Channel1
DCD DMA1_Channel2_IRQHandler ; 74:DMA1 Channel2
DCD DMA1_Channel3_IRQHandler ; 75:DMA1 Channel3
DCD DMA1_Channel4_IRQHandler ; 76:DMA1 Channel4
DCD ENET_IRQHandler ; 77:Ethernet
DCD ENET_WKUP_IRQHandler ; 78:Ethernet Wakeup through EXTI line
DCD CAN1_TX_IRQHandler ; 79:CAN1 TX
DCD CAN1_RX0_IRQHandler ; 80:CAN1 RX0
DCD CAN1_RX1_IRQHandler ; 81:CAN1 RX1
DCD CAN1_EWMC_IRQHandler ; 82:CAN1 EWMC
DCD USBFS_IRQHandler ; 83:USBFS
__Vectors_End
__Vectors_Size EQU __Vectors_End - __Vectors
AREA |.text|, CODE, READONLY
;/* reset Handler */
Reset_Handler PROC
EXPORT Reset_Handler [WEAK]
IMPORT __main
IMPORT SystemInit
LDR R0, =SystemInit
BLX R0
LDR R0, =__main
BX R0
ENDP
;/* dummy Exception Handlers */
NMI_Handler PROC
EXPORT NMI_Handler [WEAK]
B .
ENDP
HardFault_Handler PROC
EXPORT HardFault_Handler [WEAK]
B .
ENDP
MemManage_Handler PROC
EXPORT MemManage_Handler [WEAK]
B .
ENDP
BusFault_Handler PROC
EXPORT BusFault_Handler [WEAK]
B .
ENDP
UsageFault_Handler PROC
EXPORT UsageFault_Handler [WEAK]
B .
ENDP
SVC_Handler PROC
EXPORT SVC_Handler [WEAK]
B .
ENDP
DebugMon_Handler PROC
EXPORT DebugMon_Handler [WEAK]
B .
ENDP
PendSV_Handler PROC
EXPORT PendSV_Handler [WEAK]
B .
ENDP
SysTick_Handler PROC
EXPORT SysTick_Handler [WEAK]
B .
ENDP
Default_Handler PROC
; /* external interrupts handler */
EXPORT WWDGT_IRQHandler [WEAK]
EXPORT LVD_IRQHandler [WEAK]
EXPORT TAMPER_IRQHandler [WEAK]
EXPORT RTC_IRQHandler [WEAK]
EXPORT FMC_IRQHandler [WEAK]
EXPORT RCU_IRQHandler [WEAK]
EXPORT EXTI0_IRQHandler [WEAK]
EXPORT EXTI1_IRQHandler [WEAK]
EXPORT EXTI2_IRQHandler [WEAK]
EXPORT EXTI3_IRQHandler [WEAK]
EXPORT EXTI4_IRQHandler [WEAK]
EXPORT DMA0_Channel0_IRQHandler [WEAK]
EXPORT DMA0_Channel1_IRQHandler [WEAK]
EXPORT DMA0_Channel2_IRQHandler [WEAK]
EXPORT DMA0_Channel3_IRQHandler [WEAK]
EXPORT DMA0_Channel4_IRQHandler [WEAK]
EXPORT DMA0_Channel5_IRQHandler [WEAK]
EXPORT DMA0_Channel6_IRQHandler [WEAK]
EXPORT ADC0_1_IRQHandler [WEAK]
EXPORT CAN0_TX_IRQHandler [WEAK]
EXPORT CAN0_RX0_IRQHandler [WEAK]
EXPORT CAN0_RX1_IRQHandler [WEAK]
EXPORT CAN0_EWMC_IRQHandler [WEAK]
EXPORT EXTI5_9_IRQHandler [WEAK]
EXPORT TIMER0_BRK_IRQHandler [WEAK]
EXPORT TIMER0_UP_IRQHandler [WEAK]
EXPORT TIMER0_TRG_CMT_IRQHandler [WEAK]
EXPORT TIMER0_Channel_IRQHandler [WEAK]
EXPORT TIMER1_IRQHandler [WEAK]
EXPORT TIMER2_IRQHandler [WEAK]
EXPORT TIMER3_IRQHandler [WEAK]
EXPORT I2C0_EV_IRQHandler [WEAK]
EXPORT I2C0_ER_IRQHandler [WEAK]
EXPORT I2C1_EV_IRQHandler [WEAK]
EXPORT I2C1_ER_IRQHandler [WEAK]
EXPORT SPI0_IRQHandler [WEAK]
EXPORT SPI1_IRQHandler [WEAK]
EXPORT USART0_IRQHandler [WEAK]
EXPORT USART1_IRQHandler [WEAK]
EXPORT USART2_IRQHandler [WEAK]
EXPORT EXTI10_15_IRQHandler [WEAK]
EXPORT RTC_Alarm_IRQHandler [WEAK]
EXPORT USBFS_WKUP_IRQHandler [WEAK]
EXPORT TIMER7_BRK_IRQHandler [WEAK]
EXPORT TIMER7_UP_IRQHandler [WEAK]
EXPORT TIMER7_TRG_CMT_IRQHandler [WEAK]
EXPORT TIMER7_Channel_IRQHandler [WEAK]
EXPORT EXMC_IRQHandler [WEAK]
EXPORT TIMER4_IRQHandler [WEAK]
EXPORT SPI2_IRQHandler [WEAK]
EXPORT UART3_IRQHandler [WEAK]
EXPORT UART4_IRQHandler [WEAK]
EXPORT TIMER5_IRQHandler [WEAK]
EXPORT TIMER6_IRQHandler [WEAK]
EXPORT DMA1_Channel0_IRQHandler [WEAK]
EXPORT DMA1_Channel1_IRQHandler [WEAK]
EXPORT DMA1_Channel2_IRQHandler [WEAK]
EXPORT DMA1_Channel3_IRQHandler [WEAK]
EXPORT DMA1_Channel4_IRQHandler [WEAK]
EXPORT ENET_IRQHandler [WEAK]
EXPORT ENET_WKUP_IRQHandler [WEAK]
EXPORT CAN1_TX_IRQHandler [WEAK]
EXPORT CAN1_RX0_IRQHandler [WEAK]
EXPORT CAN1_RX1_IRQHandler [WEAK]
EXPORT CAN1_EWMC_IRQHandler [WEAK]
EXPORT USBFS_IRQHandler [WEAK]
;/* external interrupts handler */
WWDGT_IRQHandler
LVD_IRQHandler
TAMPER_IRQHandler
RTC_IRQHandler
FMC_IRQHandler
RCU_IRQHandler
EXTI0_IRQHandler
EXTI1_IRQHandler
EXTI2_IRQHandler
EXTI3_IRQHandler
EXTI4_IRQHandler
DMA0_Channel0_IRQHandler
DMA0_Channel1_IRQHandler
DMA0_Channel2_IRQHandler
DMA0_Channel3_IRQHandler
DMA0_Channel4_IRQHandler
DMA0_Channel5_IRQHandler
DMA0_Channel6_IRQHandler
ADC0_1_IRQHandler
CAN0_TX_IRQHandler
CAN0_RX0_IRQHandler
CAN0_RX1_IRQHandler
CAN0_EWMC_IRQHandler
EXTI5_9_IRQHandler
TIMER0_BRK_IRQHandler
TIMER0_UP_IRQHandler
TIMER0_TRG_CMT_IRQHandler
TIMER0_Channel_IRQHandler
TIMER1_IRQHandler
TIMER2_IRQHandler
TIMER3_IRQHandler
I2C0_EV_IRQHandler
I2C0_ER_IRQHandler
I2C1_EV_IRQHandler
I2C1_ER_IRQHandler
SPI0_IRQHandler
SPI1_IRQHandler
USART0_IRQHandler
USART1_IRQHandler
USART2_IRQHandler
EXTI10_15_IRQHandler
RTC_Alarm_IRQHandler
USBFS_WKUP_IRQHandler
TIMER7_BRK_IRQHandler
TIMER7_UP_IRQHandler
TIMER7_TRG_CMT_IRQHandler
TIMER7_Channel_IRQHandler
EXMC_IRQHandler
TIMER4_IRQHandler
SPI2_IRQHandler
UART3_IRQHandler
UART4_IRQHandler
TIMER5_IRQHandler
TIMER6_IRQHandler
DMA1_Channel0_IRQHandler
DMA1_Channel1_IRQHandler
DMA1_Channel2_IRQHandler
DMA1_Channel3_IRQHandler
DMA1_Channel4_IRQHandler
ENET_IRQHandler
ENET_WKUP_IRQHandler
CAN1_TX_IRQHandler
CAN1_RX0_IRQHandler
CAN1_RX1_IRQHandler
CAN1_EWMC_IRQHandler
USBFS_IRQHandler
B .
ENDP
ALIGN
; user Initial Stack & Heap
IF :DEF:__MICROLIB
EXPORT __initial_sp
EXPORT __heap_base
EXPORT __heap_limit
ELSE
IMPORT __use_two_region_memory
EXPORT __user_initial_stackheap
__user_initial_stackheap PROC
LDR R0, = Heap_Mem
LDR R1, =(Stack_Mem + Stack_Size)
LDR R2, = (Heap_Mem + Heap_Size)
LDR R3, = Stack_Mem
BX LR
ENDP
ALIGN
ENDIF
END