/*! \file gd32f10x_it.c \brief interrupt service routines \version 2014-12-26, V1.0.0, firmware for GD32F10x \version 2017-06-20, V2.0.0, firmware for GD32F10x \version 2018-07-31, V2.1.0, firmware for GD32F10x \version 2020-09-30, V2.2.0, firmware for GD32F10x */ /* Copyright (c) 2020, GigaDevice Semiconductor Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "gd32f10x_it.h" #include "main.h" #include "usart.h" #include "mmodbus.h" #include "log.h" #include "mqttRecv.h" #include "systick.h" #include "dlt645_port.h" #include "parseDeviceMessage.h" /*! \brief this function handles NMI exception \param[in] none \param[out] none \retval none */ void NMI_Handler(void) { } /*! \brief this function handles HardFault exception \param[in] none \param[out] none \retval none */ void HardFault_Handler(void) { /* if Hard Fault exception occurs, go to infinite loop */ while (1) { } } /*! \brief this function handles MemManage exception \param[in] none \param[out] none \retval none */ void MemManage_Handler(void) { /* if Memory Manage exception occurs, go to infinite loop */ while (1) { } } /*! \brief this function handles BusFault exception \param[in] none \param[out] none \retval none */ void BusFault_Handler(void) { /* if Bus Fault exception occurs, go to infinite loop */ while (1) { } } /*! \brief this function handles UsageFault exception \param[in] none \param[out] none \retval none */ void UsageFault_Handler(void) { /* if Usage Fault exception occurs, go to infinite loop */ while (1) { } } /*! \brief this function handles SVC exception \param[in] none \param[out] none \retval none */ void SVC_Handler(void) { } /*! \brief this function handles DebugMon exception \param[in] none \param[out] none \retval none */ void DebugMon_Handler(void) { } /*! \brief this function handles PendSV exception \param[in] none \param[out] none \retval none */ void PendSV_Handler(void) { } /*! \brief this function handles SysTick exception \param[in] none \param[out] none \retval none */ void SysTick_Handler(void) { delay_decrement(); runtime_increment(); } // 4G模块 void USART0_IRQHandler(void) { if (RESET != usart_interrupt_flag_get(USART0, USART_INT_FLAG_IDLE)) // 空闲中断 { usart_interrupt_flag_clear(USART0, USART_INT_FLAG_IDLE); /* 清除空闲中断标志位 */ usart_data_receive(USART0); /* 清除接收完成标志位 */ dma_channel_disable(DMA0, DMA_CH4); /* 关闭DMA传输 */ // UART0_RX_NUM = sizeof(UART0_RX_BUF) - dma_transfer_number_get(DMA0, DMA_CH4); // UART0_RX_BUF[UART0_RX_NUM] = '\0'; /* 添加字符串结束符 */ UART0_RX_STAT = 0x01; /* 接受状态 0x01:已接收到数据 */ // dma_memory_address_config(DMA0, DMA_CH4, (uint32_t)UART0_RX_BUF); // dma_transfer_number_config(DMA0, DMA_CH4, sizeof(UART0_RX_BUF)); dma_channel_enable(DMA0, DMA_CH4); Receive_MQTT_DataPack(); // 判别是否为mqtt触发的中断 } } // 485 void USART1_IRQHandler(void) { // 接收到的数据解析数据 if(protocol==2){ //modbus为2 mmodbus_callback(); } else if(protocol==1){ //645为1 dlt_callback(); } } // log //void USART2_IRQHandler(void) //{ // mbus232_callback(); // //} void DMA0_Channel4_IRQHandler(void) { dma_interrupt_flag_clear(DMA0, DMA_CH4, DMA_INT_FLAG_G); } //extern uint32_t timedisplay; //void RTC_IRQHandler(void) //{ // if (rtc_flag_get(RTC_FLAG_SECOND) != RESET){ // /* clear the RTC second interrupt flag*/ // rtc_flag_clear(RTC_FLAG_SECOND); // /* enable time update */ // timedisplay = 1; // /* wait until last write operation on RTC registers has finished */ // rtc_lwoff_wait(); // /* reset RTC counter when time is 23:59:59 */ // if (rtc_counter_get() == 0x00015180){ // rtc_counter_set(0x0); // /* wait until last write operation on RTC registers has finished */ // rtc_lwoff_wait(); // } // } //}