/*! \file gd32f10x_wwdgt.c \brief WWDGT driver \version 2014-12-26, V1.0.0, firmware for GD32F10x \version 2017-06-20, V2.0.0, firmware for GD32F10x \version 2018-07-31, V2.1.0, firmware for GD32F10x \version 2020-09-30, V2.2.0, firmware for GD32F10x */ /* Copyright (c) 2020, GigaDevice Semiconductor Inc. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "gd32f10x_wwdgt.h" /*! \brief reset the window watchdog timer configuration \param[in] none \param[out] none \retval none */ void wwdgt_deinit(void) { rcu_periph_reset_enable(RCU_WWDGTRST); rcu_periph_reset_disable(RCU_WWDGTRST); } /*! \brief start the window watchdog timer counter \param[in] none \param[out] none \retval none */ void wwdgt_enable(void) { WWDGT_CTL |= WWDGT_CTL_WDGTEN; } /*! \brief configure the window watchdog timer counter value \param[in] counter_value: 0x00 - 0x7F \param[out] none \retval none */ void wwdgt_counter_update(uint16_t counter_value) { WWDGT_CTL = (uint32_t)(CTL_CNT(counter_value)); } /*! \brief configure counter value, window value, and prescaler divider value \param[in] counter: 0x00 - 0x7F \param[in] window: 0x00 - 0x7F \param[in] prescaler: wwdgt prescaler value only one parameter can be selected which is shown as below: \arg WWDGT_CFG_PSC_DIV1: the time base of window watchdog counter = (PCLK1/4096)/1 \arg WWDGT_CFG_PSC_DIV2: the time base of window watchdog counter = (PCLK1/4096)/2 \arg WWDGT_CFG_PSC_DIV4: the time base of window watchdog counter = (PCLK1/4096)/4 \arg WWDGT_CFG_PSC_DIV8: the time base of window watchdog counter = (PCLK1/4096)/8 \param[out] none \retval none */ void wwdgt_config(uint16_t counter, uint16_t window, uint32_t prescaler) { WWDGT_CTL = (uint32_t)(CTL_CNT(counter)); WWDGT_CFG = (uint32_t)(CFG_WIN(window) | prescaler); } /*! \brief check early wakeup interrupt state of WWDGT \param[in] none \param[out] none \retval FlagStatus: SET or RESET */ FlagStatus wwdgt_flag_get(void) { if(WWDGT_STAT & WWDGT_STAT_EWIF) { return SET; } return RESET; } /*! \brief clear early wakeup interrupt state of WWDGT \param[in] none \param[out] none \retval none */ void wwdgt_flag_clear(void) { WWDGT_STAT = (uint32_t)(RESET); } /*! \brief enable early wakeup interrupt of WWDGT \param[in] none \param[out] none \retval none */ void wwdgt_interrupt_enable(void) { WWDGT_CFG |= WWDGT_CFG_EWIE; }